Model RAD is a used-oil-fired heater. It is fueled by "waste" oils.
What is a "waste" oil?
Typical examples are lubrication products found in the maintenance and service facilities for automobiles, trucks, heavy equipment, fleets, etc. These could consist of any combination of engine oil, transmission fluids, hydraulic oils, and even gear lubes and other acceptable lubricants that have been used.
Any firm generating acceptable quantities of waste oil, and having a need for facility heating or process hot water, is a candidate for waste oil heating. This could include everything from large fleet shops, automobile, truck and heavy equipment dealers and service centers, fast lubes, greenhouses, agricultural facilities, and even small garages.
The Federal EPA has designated typical waste oil as acceptable fuel, to be utilized as such in onsite recycling. A heater, furnace or boiler size limit of 500,000 BTU maximum input is required. Other than that, the facility is to recycle the waste oils generated onsite or dropped off at the site by those who change their own oils, and the combustion gases must be exhausted to the outside. States, counties or municipalities may have their own requirements, but usually follow Federal guidelines. In some instances, a permit to operate a waste oil heater, furnace or boiler may be necessary.
Reznor Model RAD used-oil-fired heaters are available in four sizes with BTU inputs of 140,000 to 500,000. RAD units utilize blowers. These units are designed to burn typical waste oils, up to 50 weight, transmission fluids and #2 fuel oil. All Reznor heaters are designed to facilitate installation and required maintenance procedures. Model RAD unit heaters are CSA certified to UL Standards and meet EPA requirements for onsite recycling of used oils. Model RAD heaters utilize a centrifugal fan that allows them to be attached to duct work for maximum zone coverage.
STANDARD FEATURES:
OPTIONAL FEATURES (Factory-Installed)
High altitude operation (Select models)
ACCESSORIES (Field-Installed)
Technical Catalog Data Sheet - RA/RAD Technical catalog information (submittal sheet) - Models RA, RAD |
Download File 395.4 kB |
Unit Installation Manual - Model RA/RAD Small Installation manual for Model RA, RAD sizes 150 & 250 |
Download File 1.3 MB |
Field Service - Replace Compressor Instructions Replacement kit instructions for 230V Air compressor on Models RA/RAD500 |
Download File 390.9 kB |
Replacement parts for model RA, RAD, and RV used-oil heaters Replacement parts |
Download File 7.9 MB |
Field Service - Replacement Kit for RA(D) and RV Heater Models Replacement Kit for Air Compressor on RA(D) and RV Heater Models |
Download File 601.5 kB |
Field Service - Ignition Controller Replacement - Models RA, RAD, RV & RAB Ignition controller replacement for Models RA, RAD, RV & RAB |
Download File 416.3 kB |
Field Service - Replacement Kit for Models RA500 and RAD500 Replacement Kit for 230V Air Compressor on Models RA500 and RAD500 |
Download File 561.6 kB |
Field Service - Replace Heat Exchanger - Model RA, RAD Instructions for replacing the tubular heat exchanger for Models RA, RAD sizes 150 & 250 |
Download File 369.9 kB |
Option - Installation - Vertical Louvers Installation - RA/RAD 350 Instructions for installing vertical louvers - Models RA/RAD in size 350 |
Download File 250.6 kB |
Option - Installation - Draft Booster Relay - RA/RAD Instructions for installing draft booster relay in Models OB, OH, RA, and RAD |
Download File 114.9 kB |
Option - Installation - Heater Stand Assembly Instructions for set up of heater stand for oil tank |
Download File 556.9 kB |
Unit Installation - Used-Oil Warning Label Instructions for attaching a "USED-OIL WARNING" label to the storage tank |
Download File 186.9 kB |
Option - Installation - High Altitude Conversion - RA/D-350 High altitude conversion for Models RA/RAD 350 |
Download File 268.2 kB |
Field Service - Pump Motor Replacement Pump motor replacement kit instructions for Models RA, RAD, RV, & RAB |
Download File 1.0 MB |
Option - Installation - Vertical Louvers Installation - RA/RAD150/250 Instructions for installing vertical louvers to Models RA, RAD sizes 150, 250 |
Download File 271.5 kB |
Unit Installation Manual - Model RA/RAD Large Installation manual for larger sizes of Models RA/RAD - 350 & 500 |
Download File 1.5 MB |
Option - Installation - High Altitude Conversion - RA/D-235 High altitude conversion for Models RA/RAD 235 |
Download File 349.0 kB |
Price Sheet Waste Oil Spare Parts Database - 2015 2015 Waste Oil Fired Heater & Boiler Spare Parts Database (Excel Spreadsheet) |
Download File 137.5 kB |